Increase protection to your lower abdomen with Chase Tactical’s JOEY Pouch Soft Armor Insert specifically designed to be used in the JOEY Utility Pouch. Added protection and safety to quality Nylon equipment.
30 products
Level III Shooters Cut Single Plate
Regular price $64.50DESCRIPTION
Predator Armor - Level III Body Armor.
Includes: Front or Back plate (Single Plate). Shooters Cut. Constructed from ballistic steel (0.25" thickness), these plates provide Level III protection based upon NIJ 0101.06 standards.
Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic-grade steel and has the option for a Kevlar-lined spall and fragmentation containment layer. Our process utilizes a unique heat-treating, quenching and tempering process that results in an extra-hardened steel plate. Predator Armor plates are lightweight, impact-resistant and hold superior ballistic properties. This allows us to provide thinner plates without sacrificing any level of protection.
All of our plates come with a base coat that aesthetically enhances the plate and provides durable characteristics. This coating does not provide fragmentation mitigation. All plates have the option to add a Kevlar lining, which provides fragmentation and spalling containment and even enhances the performance of the armor. If your carrier or plate does not have anti-fragmentation characteristics, we strongly advise including the Kevlar lining.
Features:
- Dimensions: 10” x 12” Shooters Cut
- Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
- Flat or Multicurve (Introduces a slight vertical bend to either side of the plate for better contour to the body)
- Stab and Slash Resistant
- Kevlar-lined to contain fragmentation and spall (optional)
- Durable and water-resistant coating
- Maintenance Free
- Thickness: .25”
- Designed to be used as a front or back plate
- Approximate Weight: 7.5 lbs
- 100% Made in the USA
All of our armor is independently tested and certified to NIJ 0101.06 standards by NTS-Chesapeake, which is an NIJ-approved testing facility accredited by NVLAP and A2LA to ISO 17025.
MANUFACTURER | Predator Armor |
WEIGHT (LBS) | 7.5 |
ARMOR LEVEL | LEVEL III |
DIMENSIONS | 10" x 12" Nominal |
ARMOR CONSTRUCTION MATERIAL | Ballistic Steel |
APPROXIMATE THICKNESS |
0.25" |
Level III Shooters Cut Set of Two (Front & Back)
Regular price $129.00DESCRIPTION
Predator Armor - Level III Body Armor.
Includes: Front & Back plate. Shooters Cut. Constructed from ballistic steel (0.25" thickness) these plates provide Level III protection based upon NIJ 0101.06 standards.
Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic-grade steel and has the option for a Kevlar-lined spall and fragmentation containment layer. Our process utilizes a unique heat-treating, quenching and tempering process that results in an extra-hardened steel plate. Predator Armor plates are lightweight, impact-resistant and hold superior ballistic properties. This allows us to provide thinner plates without sacrificing any level of protection.
All of Predator Armor plates come with a base coat that aesthetically enhances the plate and provides durable characteristics. This coating does not provide fragmentation mitigation. All plates have the option to add a Kevlar lining, which provides fragmentation and spalling containment and even enhances the performance of the armor. If your carrier or plate does not have anti-fragmentation characteristics, we strongly advise including the Kevlar lining.
Features:
- Dimensions: 10” x 12” Shooters Cut
- Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor
- Multicurve (Introduces a slight vertical bend to either side of the plate for better contour to the body)
- Stab and Slash Resistant
- Kevlar-lined to contain fragmentation and spall (optional)
- Durable and water-resistant coating
- Maintenance Free
- Thickness: .25”
- Designed to be used as a front or back plate
- Approximate Weight: 7.5 lbs
- 100% Made in the USA
All of our armor is independently tested and certified to NIJ 0101.06 standards by NTS-Chesapeake, which is an NIJ-approved testing facility accredited by NVLAP and A2LA to ISO 17025.
MANUFACTURER | Predator Armor |
WEIGHT (LBS) | 7.5 |
ARMOR LEVEL | LEVEL III |
DIMENSIONS | 10" x 12" Nominal |
ARMOR CONSTRUCTION MATERIAL | Ballistic Steel |
APPROXIMATE THICKNESS |
0.25" |
Level IIIA Soft Armor (Single Plate)
Regular price $110.00DESCRIPTION
- Tested To Defeat Handgun Rounds: 9mm, .357 SIG and .44 Magnum
- NIJ Level IIIA Insert - Sizing 10x12
- Thin and Lightweight Construction
- 100% Made in the USA
Predator Armor's Level IIIA Soft Armor has been tested by an independent NIJ credentialed laboratory to certify that it meets NIJ level IIIA specifications; it will stop .357 SIG FMJ, as well as .44 MAG SJHP. This armor has an ultra-slim and flexible profile without giving up any stopping capability. The Hybrid Kevlar system used in Predator Armor's Level IIIA Soft Armor is unmatched within the Soft Armor industry, providing top-rated stopping ability while still remaining thin, durable and comfortable.
Predator Armor's Level IIIA Soft Armor has a low-profile, allowing you to use it in discrete environments or to enhance any of your Predator Armor hard armor products. With all of our products made 100% in the USA, you never have to fear the quality or effectiveness of Predator Armor.
Features:
- Dimensions: 10" x 12"
- Rated to stop .357 Sig FMJ, .44 MAG SJHP and 9mm
- Multi-hit Rated
- Soft Armor panel can be used standalone for Level IIIA protection, or in conjunction with any of our Hard Armor Plates
- Waterproof Nylon Ripstop outer layer
- .45" Profile
- Panel Weight: 1.2 Lbs
- Made 100% in the USA
MANUFACTURER | Predator Armor |
WEIGHT (LBS) | 1.2 |
ARMOR LEVEL | Level IIIA Soft Armor |
DIMENSIONS | 10" x 12" |
ARMOR CONSTRUCTION MATERIAL | Hybrid Kevlar |
APROXIMATE THICKNESS. | 0.45" |
Level IIIA Soft Armor - (Set of Two)
Regular price $195.00DESCRIPTION
- Tested To Defeat Handgun Rounds: 9mm, .357 SIG and .44 Magnum
- NIJ Level IIIA Insert - Sizing 10x12"
- Thin and Lightweight Construction
- 100% Made in the USA
Predator Armor's Level IIIA Soft Armor has been tested by an independent NIJ credentialed laboratory to certify that it meets NIJ level IIIA specifications; it will stop .357 SIG FMJ, as well as .44 MAG SJHP. This armor has an ultra-slim and flexible profile without giving up any stopping capability. The Hybrid Kevlar system used in Predator Armor's Level IIIA Soft Armor is unmatched within the Soft Armor industry, providing top-rated stopping ability while still remaining thin, durable and comfortable.
Predator Armor's Level IIIA Soft Armor has a low-profile, allowing you to use it in discrete environments or to enhance any of your Predator Armor hard armor products. With all of our products made 100% in the USA, you never have to fear the quality or effectiveness of Predator Armor.
Features:
- Dimensions: 10" x 12"
- Rated to stop .357 Sig FMJ, .44 MAG SJHP and 9mm
- Multi-hit Rated
- Soft Armor panel can be used standalone for Level IIIA protection, or in conjunction with any of our Hard Armor Plates
- Waterproof Nylon Ripstop outer layer
- .45" Profile
- Panel Weight: 1.2 Lbs
- Made 100% in the USA
MANUFACTURER | Predator Armor |
WEIGHT (LBS) | 1.2 |
ARMOR LEVEL | Level IIIA Soft Armor |
DIMENSIONS | 10" x 12" |
ARMOR CONSTRUCTION MATERIAL | Hybrid Kevlar |
APPROXIMATE THICKNESS. | 0.45" |
Backpack Armor - Level IIIA
Regular price $110.00DESCRIPTION
- Tested To Defeat Handgun Rounds: 9mm, .357 SIG and .44 Magnum
- NIJ Level IIIA Insert - Sizing 10.5" x 14"
- Thin and Lightweight Construction
- 100% Made in the USA
Predator Armor's Level IIIA Backpack Armor is the perfect option for protection wherever you go. Designed to fit into the main pocket of a purse, laptop bag, briefcase, or the laptop compartment of most backpacks, this soft armor panel is lightweight and flexible, making it comfortable to carry with you on the go.
Our Backpack Armor has been tested by an independent NIJ credentialed laboratory to certify that it meets NIJ level IIIA specifications; it will stop .357 SIG FMJ, as well as .44 MAG SJHP. The panel has an ultra-slim and flexible profile without giving up any stopping capability. The Hybrid Kevlar system used in Predator Armor's Backpack Armor is unmatched within the Soft Armor industry, providing top-rated stopping ability while still remaining thin, durable and comfortable.
Predator Armor's Backpack Insert has a low-profile, allowing you to use it in discrete environments or to enhance any of your Predator Armor hard armor products. With all of our products made 100% in the USA, you never have to fear the quality or effectiveness of Predator Armor.
Features:
- Dimensions: 10.5" x 14"
- Rated to stop .357 Sig FMJ, .44 MAG SJHP and 9mm
- Multi-hit Rated
- Waterproof Nylon Ripstop outerlayer
- .22" Profile
- Panel Weight: 1.4 Lbs
- Made 100% in the USA
MANUFACTURER | Predator Armor |
WEIGHT (LBS) | 1.4 |
ARMOR LEVEL | Level IIIA Soft Armor |
DIMENSIONS | 10.5" x 14" |
ARMOR CONSTRUCTION MATERIAL | Hybrid Kevlar |
APPROXIMATE THICKNESS. | 0.22" |
JOEY Pouch Soft Armor Insert Level IIIA
Regular price $53.20Our JOEY Pouch Soft Armor insert is specifically designed for the Chase Tactical JOEY Pouch. Made with Kevlar and Advanced Ballistic Matrix Materials for the highest performance.
Description
Our Level IIIA JOEY Pouch Soft Armor insert is specifically designed for the JOEY Pouch.
JOEY Pouch Soft Armor Features:
- Protection: Level IIIA Stand Alone against handgun rounds
- NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06
- Aerial Density: 1.19 psf (5.6kg/sqm)
- Thinness: 0.26”
- Material: Kevlar Soft Armor Panel
- ABMM: Advanced Ballistic Matrix Materials
- Multi-hit capabilities
- Sonobond Sealed rip stop water resistant cover
- Custom Sizing: Available for min quantity +20% surcharge per size
- Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship
Additional information
Weight | 1 lbs |
---|---|
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Weapon Types
CARTRIDGE | PROJECTILE | VEL (ft/s ± 30) | VEL (m/s ± 9) |
.357 SIG (NIJ06) | 125 gr FMJ | 1470 | 448 |
.44 Magnum (NIJ06) | 240 gr SJHP | 1430 | 436 |
.357 Magnum | 158 gr JSP | 1430 | 435 |
.44 Magnum | 240 gr SWCGC | 1400 | 426 |
9 x 19 mm Parabellum | 124 gr FMJ RN | 1400 | 426 |
40 S&W | 180 gr FMJ | 1155 | 352 |
Some Products We Sell Carry RESTRICTIONS In Certain States and Some Products ARE NOT EXPORTABLE Under U.S. ITAR Laws. The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO just make sure when you’re ordering an item you know that it’s exportable and follow U.S. Export ITAR Laws.
We also ship internationally.
Valkyrie™ Build Your Own Bundle
Regular price $538.00The Valkyrie is our Berry-compliant, top-of-the-line plate carrier, complete with a fully adjustable cummerbund. Also, included in our base bundle are two curved A1 steel alloy blend plates.
Base Bundle
- 1 x Valkyrie™ Plate Carrier
- 2 x A1 Plates - 10" x 12" Base Coat
The Valkyrie™ Plate Carrier was designed to be a 100% Berry compliant plate carrier that provides the same quality as upper-tier plate carriers at a more modest price.
The Valkyrie is compatible with all 10”x12” trapezoidal steel, ceramic, or polyethylene body armor, and features everything you’d expect in a top-of-the-line carrier. From its dual admin pouches compatible with our Kangaroo magazine pouch insert, fully adjustable cummerbund, and generously sized Velcro ID panels, the Valkyrie brings together the ideal balance of quality components and craftsmanship, ergonomics, and comfort.
Base Bundle
- 1 x Valkyrie™ Plate Carrier
- 2 x A1 Plates - 10" x 12" Base Coat
Highlights:
- Berry compliant: 100% designed, sourced, and manufactured in the USA
- Durable: genuine Cordura® 500D nylon construction, bar-tack stitching at all stress-points and webbing, front-mounted, quick-release buckles with laminated nylon protective covers
- Adaptable: dual admin pockets w/laminated nylon pull tabs
- Comfortable: adjustable cummerbund with Velcro® inner lining, mesh padded removable shoulder pads. Built-in front and rear inner lining plate pocket padding.
VALKYRIE CARRIER
- Material: 500D Nylon
- Supported Plate Size: 10”x12”
- Size: For body types M to XXL
- Weight: 2.2 lbs
- Features: Collapsible carry handle, large Velcro ID panels
- Manufactured: U.S. (Armored Republic) & Berry Compliant
A1 BODY ARMOR
- Material: Ballistic steel and alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
- Dimensions: 8 lbs, 0.31" thick
- Shelf life: 20 years
- Compatibility: Testudo, Valkyrie & Invictus Carriers
- Manufactured: United States
A2 BODY ARMOR (upgrade option)
- Material: Ballistic steel alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39(ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions:
- Weight: 6.5 lbs (per plate)
- Shelf life: 20 years
- Compatibility: Testudo, Valkyrie, & Invictus Carriers
- Manufactured: United States
A3 BODY ARMOR (upgrade option)
- Material: Alloy, polyethylene & polyurea cover
- Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions & Compatibility
-
10" x 12"
- Weight: 4.6 lbs
- Thickness: 0.7 inches
- Plate Carriers: Testudo, Valkyrie & Invictus
-
10" x 12"
- Shelf life: 5 years
- Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))
CERAMIC BODY ARMOR (upgrade option)
- Material: Ceramic, with FragLock™ Coating
- Protection: .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2880 ft/s (+/- 30 ft/s).
- Capability: Single-hit protection
-
Dimensions:
-
10" x 12"
- Weight: 7.5 lbs
- Thickness: 0.75"
-
10" x 12"
- Shelf life: 5 years
- Compatibility: Testudo, Valkyrie, & Invictus Carriers
- Manufactured: United States
POLYETHYLENE BODY ARMOR (upgrade option)
- Material: Polyethylene, with FragLock™ Coating
- Protection: 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2780 ft/s (+/- 30 ft/s).
- Capability: Multi-hit protection
-
Dimensions
-
10” x 12”
- Weight: 3.3 (+/- .3) lbs
- Thickness: 1"
-
10” x 12”
- Shelf life: 5 years
- Compatibility: Testudo, Invictus, and Valkyrie Carriers
- Manufactured: United States
PROTECTOR HELMET (upgrade)
- Material: 100% aramid composite
- Protection: 357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity range of 1400-1450 fps and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g
-
Size & Weight
-
Medium
- Outer: 10.2" x 8.5" x 6.2" (30" circumference)
- Inner: 9.6" x 7.8" x 5.9" (27.6" circumference)
- Thickness: 0.32"
- Weight: 3.1 lbs
-
Large
- Outer: 10.4" x 8.6" x 6.2" (30.7" circumference)
- Inner: 9.8" x 8" x 5.9" (28.5" circumference)
- Thickness: 0.32"
- Weight: 3.2 lbs
-
Extra Large
- Outer: 10.9" x 8.9" x 6.8" (31.7" circumference)
- Inner: 10.3" x 8.3" x 6.5" (29.4" circumference)
- Thickness: 0.32"
- Weight: 3.3 lbs
-
Medium
AR Invictus™ Build Your Own Bundle
Regular price $483.00The AR Invictus™ is a lightweight, low-profile plate carrier that offers both excellent mobility and comfort, without sacrificing durability. Two curved A1 plates also come in this base bundle set-up.
Want loadout recommendations? Check out our pre-built packages.
Base Bundle
- 1 x AR Invictus Plate Carrier
- 2 x A1 Plates - 10" x 12" Base Coat
The AR Invictus™ plate carrier was designed to be our lightest and lowest-profile carrier. Weighing in at a mere 1.3 pounds, the Invictus has been jump-tested by US Special Operations personnel and provides extreme mobility without sacrificing comfort.
The Invictus (Latin for Undefeated) accepts all trapezoidal 10”x12” plates and is laser cut from laminated nylon. The Hypalon shoulder straps and pull tabs are low-profile and secure. The included cummerbund is cut from the same laminate and can accommodate our padded side plate pockets. Both the plate carrier and cummerbund feature generous PALS cutouts for all MOLLE-compatible pouches and accessories.
Base Bundle
- 1 x AR Invictus Plate Carrier
- 2 x A1 Plates - 10" x 12" Base Coat
Highlights
- Durable: laminate exterior construction
- Comfortable: flexible interior materials design that both stretches and breaths
- Adjustable: fully-adjustable PALS cummerbund
- Modular: cummerbund accommodates our padded side plate pockets (sold separately)
- Expandable: full front & back laser-cut PALS coverage for all MOLLE-compatible accessories
INVICTUS CARRIER
- Material: 500D Nylon
- Supported Plate Size: 10”x12”
- Size: For body types M to XXL
- Weight: 1.3 lbs
- Features: Velcro web sections for ID panels; Swift Clip rig compatible
- Manufactured: Vietnam (AR500 Armor)
A1 BODY ARMOR
- Material: Ballistic steel and alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
- Dimensions: 8 lbs, 0.31" thick
- Shelf life: 20 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
A2 BODY ARMOR (upgrade option)
- Material: Ballistic steel alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39(ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions:
- Weight: 6.5 lbs (per plate)
- Shelf life: 20 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
A3 BODY ARMOR (upgrade option)
- Material: Alloy, polyethylene & polyurea cover
- Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions & Compatibility
-
10" x 12"
- Weight: 4.6 lbs
- Thickness: 0.7 inches
- Plate Carriers: Testudo, Valkyrie & Invictus
-
10" x 12"
- Shelf life: 5 years
- Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))
CERAMIC BODY ARMOR (upgrade option)
- Material: Ceramic, with FragLock™ Coating
- Protection: .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2880 ft/s (+/- 30 ft/s).
- Capability: Single-hit protection
-
Dimensions:
-
10" x 12"
- Weight: 7.5 lbs
- Thickness: 0.75"
-
10" x 12"
- Shelf life: 5 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
POLYETHYLENE BODY ARMOR (upgrade option)
- Material: Polyethylene, with FragLock™ Coating
- Protection: 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2780 ft/s (+/- 30 ft/s).
- Capability: Multi-hit protection
-
Dimensions
-
10” x 12”
- Weight: 3.3 (+/- .3) lbs
- Thickness: 1"
-
10” x 12”
- Shelf life: 5 years
- Compatibility: Testudo, Invictus, and Valkyrie Carriers
- Manufactured: United States
PROTECTOR HELMET (upgrade)
- Material: 100% aramid composite
- Protection: 357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity range of 1400-1450 fps and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g
-
Size & Weight
-
Medium
- Outer: 10.2" x 8.5" x 6.2" (30" circumference)
- Inner: 9.6" x 7.8" x 5.9" (27.6" circumference)
- Thickness: 0.32"
- Weight: 3.1 lbs
-
Large
- Outer: 10.4" x 8.6" x 6.2" (30.7" circumference)
- Inner: 9.8" x 8" x 5.9" (28.5" circumference)
- Thickness: 0.32"
- Weight: 3.2 lbs
-
Extra Large
- Outer: 10.9" x 8.9" x 6.8" (31.7" circumference)
- Inner: 10.3" x 8.3" x 6.5" (29.4" circumference)
- Thickness: 0.32"
- Weight: 3.3 lbs
-
Medium
Testudo™ Gen 2 Build Your Own Bundle
Regular price $428.00The Testudo Gen 2.0 plate carrier offers maximum coverage and load-bearing capability, right out of the box! Also included in our base bundle are two curved A1 plates.
Want loadout recommendations? Check out our pre-built packages.
Base Bundle
1 x Testudo™ Plate Carrier
2 x A1 Plates - 10" x 12" Base Coat
When armor coverage is your primary concern, the all-inclusive Testudo Gen 2.0 carrier has you covered.
Named after the Roman army’s defensive formation, the Testudo comes ready to provide you the maximum coverage of all our plate carriers, right out of the box.
The Testudo will accommodate 10”x12” or 11”x14” body armor of any type. Its fully adjustable cummerbund and shoulder straps make the Testudo versatile enough for large or medium body types. Plenty of PALS webbing for attaching your MOLLE-compatible pouches, holsters, and accessories. The generous supply of Velcro -- covering all the PALS webbing -- offers superior versatility for placement of medical, moto, or other patches or gear.
All-inclusive
The Testudo is our flagship and has everything you need, right out of the box. The removable cummerbund sports integrated side-armor pockets, and the low-offset shoulder straps mean the rear plate pocket rides at the proper height. If you run plates smaller than 10”x12”, add our Adaptive Plate Insert and you’ve got everything you need to run a lightweight run-and-gun setup, all the way to fully-kitted for maximum protection and load-bearing capability. Just add armor and pouches (sold separately)
Base Bundle
- 1 x Testudo™ Plate Carrier
- 2 x A1 Plates - 10" x 12" Base Coat
Highlights:
- Durable: constructed with quality nylon and bar tacks
- All-Inclusive: complete, and ready out of the box
- Comfortable: padded inner lining and shoulder pads
- Customizable: Built-in cummerbund with side plate pouches
- Versatile: designed for optimal mobility
TESTUDO GEN 2 CARRIER
- Material: 500D Nylon
- Supported Plate Size: 10”x12” & 11"x14"
- Size: For body types M to 3XL
- Weight: 3.6 lbs
- Features: Front and rear Velcro panels & laser-cut PALS systems
- Manufactured: Vietnam (Armored Republic)
A1 BODY ARMOR
- Material: Ballistic steel and alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
- Dimensions: 8 lbs, 0.31" thick
- Shelf life: 20 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
A2 BODY ARMOR (upgrade option)
- Material: Ballistic steel alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
- Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39(ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions:
- Weight: 6.5 lbs (per plate)
- Shelf life: 20 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
A3 BODY ARMOR (upgrade option)
- Material: Alloy, polyethylene & polyurea cover
- Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
- Capability: Edge-to-edge multi-hit protection
- Form: Curved
-
Dimensions & Compatibility
-
10" x 12"
- Weight: 4.6 lbs
- Thickness: 0.7 inches
- Plate Carriers: Testudo, Valkyrie & Invictus
-
10" x 12"
- Shelf life: 5 years
- Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))
CERAMIC BODY ARMOR (upgrade option)
- Material: Ceramic, with FragLock™ Coating
- Protection: .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2880 ft/s (+/- 30 ft/s).
- Capability: Single-hit protection
-
Dimensions:
-
10" x 12"
- Weight: 7.5 lbs
- Thickness: 0.75"
-
10" x 12"
- Shelf life: 5 years
- Compatibility: Testudo, Veritas, Valkyrie, & Invictus Carriers
- Manufactured: United States
POLYETHYLENE BODY ARMOR (upgrade option)
- Material: Polyethylene, with FragLock™ Coating
- Protection: 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2780 ft/s (+/- 30 ft/s).
- Capability: Multi-hit protection
-
Dimensions
-
10” x 12”
- Weight: 3.3 (+/- .3) lbs
- Thickness: 1"
-
10” x 12”
- Shelf life: 5 years
- Compatibility: Testudo, Invictus, and Valkyrie Carriers
- Manufactured: United States

A1 - Alloy Body Armor
Regular price $129.00The curved A1 body armor is a rugged, steel alloy blend plate that provides level 3 plus body armor protection which is capable of defeating 5.56x45 M855A1 (AP) rounds at velocities of up to 3,100 FPS, 7.62x51 M61 (AP) rounds at velocities up to 2,800 FPS, and all lesser threats with multi-hit capability. This A1 armor plate from Armored Republic features a durable FragLock™ coating, which gives both fragmentation protection and seals the armor to ensure its 20-year shelf life.
The A1 - Alloy Body Armor is able to stop level III+ threats such as 7.62x39/7.62x51/5.56 M193s, 5.56 M855 penetrators, and .223/.308 WIN rounds. And unlike ceramic or polyethylene material, this custom steel alloy blend is able to take several hits from these rounds without fail. This multi-hit special threat resistance is the distinguishing quality of the A1 plate.
The armor plate is curved, shooters cut, and features either our FragLock™ Base Coat or Build-Up Coat.
The FragLock™ coating provides a maintenance-free shelf life of twenty years, which makes this steel plate last much longer than polyethylene or ceramic alternatives. Our Build-Up Coat prevents fragmentation injury, while our Base Coat seals the armor plates up from sweat.
Frequently Asked Questions
- What does level 3 body armor protect against? How does level 3 plus protection differ? Level 3 body armor protection rating by the National Institute of Justice (NIJ) standards is 6x shots of 7.62x51mm @ 2,780 FPS from 51' away. Armored Republic's A1 body armor which provides level 3 Plus protection, further enhances the protection established by the NIJ, by also stopping threats such as 7.62x39 @ 3,000 FPS, .223 5.56 M193/M855 penetrators @ 3,200 FPS and /.308 WIN rounds @ 3,000 FPS.
- How much does level 3 body armor weigh? Armored Republic's AR500 Armor® Heritage Plate which provides level 3 protection weighs 8.5 lbs per plate while our A1 plate which provides level 3+ protection is 8 lbs per plate (for the 10" x 12" Base Coat coating).
- Can civilians own level 3 body armor? Yes. Exceptions include New York and Connecticut- both of which restrict ownership of body armor to law enforcement and active military only.
Material: Ballistic steel and alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30 FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified
Capability: Edge-to-edge multi-hit protection
Form: Curved
Dimensions & Compatibility:
-
10" x 12"
- Base Coat (8 lbs, 0.31" thick)
- Build-Up Coat (9.5 lbs, 0.56" thick)
- Plate Carriers: Testudo, Valkyrie & Invictus
-
11" x 14"
- Base Coat (10 lbs, 0.31" thick)
- Build-Up Coat (11.5 lbs, 0.56" thick)
- Plate Carriers: Testudo
Shelf life: 20 years
Manufactured: United States

Soft Side Panels
Regular price $44.00Protection on all sides against 95% of the threats used in shooting incidents; our soft armor side panels from Armored Republic are compatible with all side pocket cummerbund systems and stop all handgun threats. Carry extra coverage without extra weight or bulk, giving you much-needed protection in situations where you could be exposed in multiple directions.
For situations where you’re likely to be exposed on multiple sides, the Soft Side Panel provides protection against most threats you’re likely to face. Sized 6” x 8”, this soft side plate is an IIIA body armor panel tested to stop .44 Magnum rounds and all lesser threats. It is sized to fit most side plate pockets and MOLLE pouches on the market.
Our standard p-Aramid Rimelig offers an economic lightweight option, with a weight of 0.7 lbs and thickness of 0.5".
For even thinner and lighter armor with the same protection, consider upgrading to the Hybrid model, which uses advanced materials for even thinner and lighter panels. Our Hybrid side plate version maximizes the benefits of high-tech materials such as Gold Shield® and SpectraShield®, resulting in a light and ultra-thin panel at 0.45 lbs and 0.31" thick.
*If you're using a Valkyrie or Invictus plate carrier you will need to also purchase side plate pouches.
Frequently Asked Questions
- What is soft body armor? This type of armor is typically made of p-aramids like Dupont Kevlar, Dupont Gold Shield, and Honeywell Spectra Shield. Soft body armor offers people a flexible, lightweight option that is often designed to have protection levels of II, IIA, or IIIA.
- Is soft body armor or hard armor better? This will depend on what best fits your needs. If you want lightweight, concealable armor that protects against handgun threats, such as our S2 panel, then soft armor is a smart choice. For rifle-rated protection, our AR500 Armor® Heritage Plate, A1, A2, A3, P2, and C2 plates are great options.
Materials:
- Rimelig: p-Aramid
- Hybrid: Gold Shield® and SpectraShield® and Kevlar
Protection: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1,470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g (230 gr)
Capability: Multi-hit protection
Dimensions:
-
6" x 8"
- Rimelig: 0.7 lbs & 0.5" thick
- Hybrid: 0.45 lbs & 0.31" thick
Shelf life: 5 years
Compatibility: Testudo, Valkyrie & Invictus Carriers
-
*If you're using a Valkyrie or Invictus plate carrier you will need to also purchase side plate pouches.
Manufactured: United States
A1 & A2 Hard Side Plates
Regular price $80.00The curved A1 and A2 Hard Armor Side Plates from Armored Republic are there for you when you’re exposed on multiple sides and need higher coverage: Made for any standard cummerbund side plate pockets, this steel armor provides rifle-rated multi-hit protection while being thinner than ceramic and polyethylene. This makes for a reliable low-profile option for rifle protection on all sides.
Note: these side plates are 6 inches horizontally and 8 inches vertically
Side plates are a useful addition to your setup whenever you’re expecting to be exposed on more than your front or back, such as in entry or defensive standpoints. Non-squared-off shooting positions, such as in hallways or in vehicles, also make side plates a highly valuable asset.
Armored Republic's A1 and A2 Hard Side Plates, which are 6 inches horizontally and 8 inches vertically are compatible with most plate carriers that include cummerbund mounted side plate pouches. It comes standard with a curved profile and a base coat of FragLock® configuration- this base coat protects the plate from the elements, gives it a 20-year shelf-life, and deflects fragmentation away from the wearer. An upgrade is available to give the steel plate a Build-Up FragLock® Coat, which captures the fragmentation completely instead of deflecting it away.
The A1 and A2 side armor plates are rated for 5.56mm M193 ammo at 3,100 FPS.
When used with our Adaptive Plate Insert in conjunction with a soft armor panel, our 6"x8" plates can be also used as a rifle-rated trauma/speed plate, offering enhanced protection for your heart.
*If you're using a Valkyrie or Invictus plate carrier you will need to also purchase side plate pouches.
Frequently Asked Questions
- Where do side plates go on body armor? Side plates are placed into the cummerbund. They can be placed inside of integral pouches or mounted by add-on side plate pouches. Always make sure to check your carrier's cummerbund to consult if you have side plate pouches.
- What size is side plate armor? Side plate armor is usually 6" x 6" or 6" x 8". Keep in mind that 6” x 8” armor is 8 inches vertically. Unless you are tall, some carriers can position these side plates higher into your armpit leading to discomfort. We do not recommend 6” x 8” side plates unless you are 6 feet tall or higher.
- Are body armor side plates necessary? Simply put, it depends on your task. Modern doctrine will have you present yourself to your target head on which maximizes your body armor footprint presented to the bad guy. Vehicle operations and room clearing however can leave your sides exposed and for these tasks, side armor is recommended.
- What do side plates protect? Side plates protect the same vital organs your front and back plates protect, they simply protect them from side attacks.
Material: AR500 Steel, with FragLock™ Coating
Protection:
- A1: 7.62x51 M80 Ball (i.e. .308) at 3,000 FPS (+/- 30FPS), 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x39 (i.e. AK-47). DEA Certified. Not rates for AP rounds.
- A2: 7.62x51 M80 NATO Ball (i.e. .308) at 2,850 FPS, 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39 (i.e. AK-47). Not rated for AP rounds.
Weight:
-
A1
- Base Coat (3.45 lbs, 0.31")
- Build-Up Coat (3.65 lbs, 0.56")
-
A2
- Base Coat (3 lbs, 0.25")
- Build-Up Coat (3.23 lbs, 0.50")
Capability: Edge-to-edge multi-hit protection
Form: Curved
Shelf life: 20 years
Compatibility: Testudo, Valkyrie & Invictus Plate Carriers
- *If you're using a Valkyrie or Invictus plate carrier you will need to also purchase side plate pouches.
Manufactured: United States

Backpack Armor Insert
Regular price $189.00Turn your favorite backpack into everyday handgun protection with our Hybrid Backpack Armor Insert from Armored Republic: Tested to Level IIIA standards, this bullet-resistant backpack soft body armor panel will protect the wearer from all pistol threats, stopping the rounds used in 95% of shooting incidents. Flexible and weighing less than 2 pounds, you can wear this armor insert for long periods of time without even noticing it. Also, at 15 inches tall and 11 inches wide, it can fit most any backpack while still providing expansive coverage.
Your best armor is the armor you have on you. That’s why the Armored Republic designed the Backpack Armor Insert specifically for our backpacks, allowing easy integration into an accessory you already take to your daily outings.
The Hybrid soft body armor insert can fit into your backpack apart from any dedicated department but also fit very well into a hydration or laptop pocket (in most cases alongside your laptop). It is made of Dupont Kevlar, Spector Shield, and Gold Shield Ballistic Fabrics. Because the panel is soft and flexible, it can be easily placed alongside other items without concern of them being battered or misplaced.
Tested in accordance with NIJ 0101.06 standards, the armor insert is Level IIIA rated with multi-hit protection against .357 SIG FMJ Flat Nose (FN) bullets (with a specified mass of 8.1 g (125 gr)) at velocities of up to 1,470 ft/s (+/- 30 ft/s), as well as against .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g (230 gr).
The ideal choice for staying prepared in everyday life; turn your commuter pack into a concealed bullet-resistant backpack capable of defeating most any round you’re likely to face.
Frequently Asked Questions
- Is there such a thing as a bulletproof backpack? No, nothing is bulletproof. Backpacks are bullet-resistant and are designed to stop specific threats mitigated by the various armor that is put in the bag.
- What can level 4 armor stop? Can a level 4 plate be put in an armored backpack? Level IV per the NIJ’s 0101.06 standards are rated to stop a single 30-06 M2 AP projectile fired at 51’ away, at a velocity of 2,880 FPS. This rating is NOT for multiple hits of this threat or lesser threats. Typically speaking, a level IV plate will stop a single bullet from most rifle threats and their AP counterparts. Yes, all Phoenix and Firebird armored backpacks made by Armored Republic have a dedicated laptop compartment that will house a level IV insert, or any of our other primary armor inserts in a 10” x 12” size (A1, A2, A3, P2, and C2).
- What are bulletproof backpacks made of? A backpack is bullet-resistant, not bulletproof since no one backpack insert can protect the wearer from all threats. A bullet-resistant backpack either has the armor sewn into the lining or an insert to place it in. Most backpacks have a soft armor panel since it is lighter weight (1-3 lbs) while steel, ceramic, and UHMWPE (polyethylene) can all be added to protect against rifle threats.
- Can a bulletproof vest stop an AK-47? There is no such thing as a bulletproof vest/armor- only bullet-resistant. Body armor cannot protect the wearer from every threat as each piece of armor is designed to stop specific levels of threats. Learn more by reading about National Institute of Justice (NIJ) standards in our Knowledge Base. An AK-47 and its 7.62x39 rounds are addressed by all level 3 and higher plates.
-
What level of armor stops an AR-15? Since level 3 does not address all cartridge types and barrel lengths used by the AR-15, level 3 plus and level 4 are recommended to address all 5.56 threats. Armored Republic’s A1, A2, and A3 steel alloy plates are all level 3 plus rated and protect against additional threats such as:
- A1 Body Armor: 7.62x39 @ 3,000 FPS, .223 5.56 M193/M855 penetrators @ 3,200 FPS and /.308 WIN rounds @ 3,000 FPS.
- A2 Body Armor: 7.62x39 at 2,850 FPS. Not rated for AP rounds.
- A3 Body Armor: 7.62x39mm M43 (penetrator) at 2380 FPS, 5.56 M193 at 3,250 FPS, and 5.56 M855 (penetrator) at 3,145 FPS
Material: Dupont Kevlar, Spector Shield, and Gold Shield Ballistic Fabric
Protection: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1,470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g (230 gr)
Capability: Multi-hit protection
Dimensions:
-
11" x 15"
- 1.47 lbs & 0.25” thick
Shelf life: 5 years
Compatibility: Most backpacks and laptop bags
Manufactured: United States

AR500 Armor® Heritage Plate
Regular price $65.00Affordable, strong, and reliable: Our AR500 Armor® Heritage Plate from Armored Republic is made of our custom steel alloy blend which is engineered to perform better than the generic AR500 steel used by other armor and target makers. The armor plate comes in flat and curved forms, features level 3 body armor protection, multi-hit capability, and has a durable FragLock™ base coating. Additionally, this armor plate has a lengthy shelf life, retaining its full strength for twenty years.
Essential protection ought to be affordable and reliable, which is why Armored Republic is proud to offer one of the most cost-effective plates on the market with our AR500 Armor® Heritage Plate: The plate material is a steel alloy blend, has our patented Advanced Shooters Cut shape, and is covered with an exclusive FragLock™ Base Coat.
Our AR500 Armor® Heritage armor plate, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means that its level 3 body armor protection is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS.
Frequently Asked Questions
- What does level 3 body armor protect against? The National Institute of Justice (NIJ) protection rating for level 3 body armor is 6x shots of 7.62x51mm @ 2,780 FPS from 51' away. Some level III plates are considered special threat plates in that in addition to this they will address other common threats. For example, our level 3 Heritage Plate will stop 5.56x45 M855 “green tips” @ 2,780 FPS from a 16” barrel, while our P2 plates will stop 5.56x45 M193 Ball @ 3,200 FPS.
- What will IIIA body armor stop? IIIA body armor is rated to stop 6x hits from 125-grain .357 SIG FMJ flat-nose bullets with speeds up to 1,470 feet per second and 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with speeds up to 1,430 ft/s, along with all lesser handgun threats.
- Can civilians own level 3 body armor? Yes, except in New York and Connecticut. Both of these states restrict body armor ownership to law enforcement and active military only.
Material: AR500 steel alloy blend, with FragLock™ Coating
Protection: 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s).
Capability: Edge-to-edge multi-hit protection
Form: Flat and Curved (base coat)
Dimensions:
- Weight: 8.5 lbs
- Thickness: 0.34" thick
- Plate Carriers: Testudo, Valkyrie, & Invictus
Shelf life: 20 years
Manufactured: United States

S2 - Soft Body Armor
Regular price $149.00The soft body armor option for concealed protection and an excellent choice for a lightweight overt loadout: Our S2 panel provides level IIIA body armor protection and is built to be convenient and capable of stopping multiple hits from all handgun threats up to 1,440 FPS. This soft armor plate is made of two alternating aramid types, layered in a special arrangement that allows the panel to work multi-directionally.
The S2 - Soft Body Armor panel is made of Aramid and built for a balance between affordability and top-level capability. It is lightweight at just 1.25 lbs and has strong stopping power defeating all handgun threats.
Tested to NIJ 0101.06 standards, the S2 is capable of stopping all IIIA body armor threats: 125-grain .357 SIG FMJ flat-nose bullets with speeds up to 1,470 feet per second and 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with speeds up to 1430 ft/s.
Because the S2 panel is soft armor, it can be used in a concealment capacity and bends with movements of a person's upper torso. The soft armor panel is designed, cut, sewn, and assembled in-house in Phoenix, Arizona, and has a 5-year shelf life.
Frequently Asked Questions
- What is soft body armor? Soft body armor is a type of armor that is often made of layers of p-aramids like Dupont Kevlar, Dupont Gold Shield, and Honeywell Spectra Shield. This armor is flexible, lightweight, and is often designed to have protection levels of II, IIA, or IIIA.
- Is soft body armor or hard armor better? This depends on what best fits your needs. Soft body armor is a smart choice if you're wanting armor that is lightweight, concealable, and protects against handgun threats, like our S2 panel. If you need rifle-rated protection then hard armor is a smarter choice like our AR500 Armor® Heritage Plate, A1, A2, A3, P2, and C2 plates.
- Can soft armor stop bullets? Can it stop knives? Soft armor has no problems defeating handgun rounds. As for edged weapons- it depends. Most soft body armor, at least contemporary designs using aramid or Kevlar, are arranged in a multi-directional weave pattern. This means soft armor generally acts like a net with tensile strength and density high enough to resist a modest ballistic threat. Due to this design, knives, arrowheads, and truncated or conical projectiles with a high enough velocity (like rifle rounds) can ultimately pass through. Most stab-resistant soft armor has a special “chainmail” like layer to address edged threats, however, it can be ineffective against hypodermic needles and add a significant cost and weight to the armor platform.
Material: Aramid Fiber, and Laminated Ripstop Nylon (sonic welded)
Protection: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1g (125gr) and a velocity of 1,470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6g (230gr)
Capability: Multi-hit protection
Dimensions & Compatibility:
-
10” x 12”
- Weight: 1.25 lbs
- Thickness: 0.36"
- Plate Carriers: Testudo, Valkyrie, Invictus & AR Concealment
-
11" x 14"
- Weight: 1.54 lbs
- Thickness: 0.36"
- Plate Carriers: Testudo & AR Concealment
Shelf life: 5 years
Manufactured: United States

C2 - Ceramic Body Armor
Regular price $249.00Get the highest protection level the industry can offer with our curved, ceramic C2 body armor from Armored Republic. It provides level 4 body armor protection and is tested to stop .30 caliber armor-piercing bullets at 2,880 feet per second: A popular choice for military personnel, this level 4 ceramic armor plate is developed 100% in-house in the United States and is compatible with all of our standard carriers.
For maximum protection against a high-grade military threat, our C2 - Ceramic Body Armor is the best option the market can provide: This Armored Republic level 4 body armor rated plate provides single-hit protection and is tested to the NIJ’s proposed 0101.07 standard as an RF3 plate, which is the highest protection listed. This protection rating means the plate can stop a .30 caliber Armor Piercing bullet, with a mass of 10.8g, at speeds of up to 2,880 ft/s. The U.S. Military designation for this is an M2 AP.
In addition to the higher level IV protection level, this ceramic C2 armor plate has several other advantages: Its shape and backface deformation resistance, patented ergonomic cut, and proprietary FragLock™ coating.
Ceramic fractures into itself when hit, mitigating projectile fragmentation at the risk of creating spalling. It also allows for less backface deformation and thus helps prevent the injuries caused by the bullet’s blunt impact. It is also a bit lighter than some steel options.
Finally, the C2 ceramic body armor is also sprayed with a FragLock™ coating unique to Armored Republic plates. Armor is often liable to both eroding from the elements and fragmentation when hit by a bullet. FragLock™ helps solve both these problems, protecting the plate from the elements as well as protecting you from fragmentation.
Frequently Asked Questions
- Is ceramic better than steel armor? There are pros and cons to both armor types. Which armor is better depends on which is the right armor for your needs. Steel is a smart choice for those who are preparing for threats we actively face in the United States, who want to keep costs to a minimum (steel is cheaper than ceramic), and who want armor that is very durable and requires little to no maintenance. Ceramic is a good choice for those who are anticipating an environment where explosives or large-caliber armor-piercing rounds could occur and cost or low shelf-life is not an issue.
- Is ceramic body armor fragile? Ceramics most well-known weakness is its brittle composition which is due to how it is manufactured. Ceramic is susceptible to hairline cracks (even ones you cannot see unless you x-ray your plate) from it being tossed into a trunk or being dropped on the ground.
- Is ceramic armor better than Kevlar? Ceramic armor is better than Kevlar if you are looking for the best rifle-rated protection from a single threat. This means ceramic armor is going to perform better than Kevlar to stop up to a single armor-piercing M2 30-06 round. If your threat assessment deems handguns to be your biggest threat, and you need to conceal armor under clothing, Kevlar is a far more practical option. Lastly, keep in mind that Kevlar is used in conjunction with all ceramic plates to prevent spalling.
Material: Ceramic, with FragLock™ Coating
Protection: .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2,880 ft/s (+/- 30 ft/s).
Capability: Single-hit protection
Form: Curved
Dimensions & Compatibility:
-
10" x 12"
- Weight: 7.5 lbs
- Thickness: 0.75"
- Plate Carriers: Testudo, Valkyrie & Invictus
Shelf life: 5 years
Manufactured: United States
P2 - Polyethylene Body Armor
Regular price $399.00Rifle-rated protection at its lightest: At less than half the weight of steel and ceramic, the curved, polyethylene P2 body armor from Armored Republic has level 3 protection and is a popular option for those looking to minimize weight as much as possible. For those working near water, this armor plate’s neutral buoyancy is also an important asset.
While this body armor's primary usage is for a plate carrier, it can also be inserted into a laptop pocket in one of our Phoenix or Firebird armored backpacks for added lightweight, rifle-rated protection.
Please Note: Due to its size and profile, this plate currently fits in our Testudo, Invictus, and Valkyrie plate carriers. Additionally, due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.
The P2 - Polyethylene Body Armor is made of polyethylene material and provides high-grade protection that won’t fatigue you when you’re active and won’t endanger you when you’re near water. Tested independently to NIJ Level 3 standards, the P2 plate provides level 3 protection which is capable of stopping the 7.62x51 M80 Ball at 2780 FPS. It has also been tested to stop some special threats; it will defeat 5.56x45 M193 at 3150 FPS and 7.62x39 AK-47 at 2380 FPS. Due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.
Polyethylene stops threats by “capturing” the bullet in its material- the heat of the spinning bullet softens the polyethylene enough to melt it partially, allowing the bullet into the material, where it then is stopped by the remaining unmelted fibers within the plate. As the bullet slows down, the polyethylene then rehardens. Because of its unique way of stopping bullets, polyethylene is able to take multiple hits without shattering like ceramic plate alternatives.
The primary benefit of the P2 polyethylene armor plate, however, is its weight: Only PE hard armor can provide rifle-rated protection at under four pounds. The greater activity this allows makes polyethylene a popular choice for some military personnel.
As with our other hard armor options, the P2 armor plate is also sprayed with our FragLock™ solution to seal it from the elements.
Frequently Asked Questions
- How is polyethylene body armor made? Body armor polyethylene is made by unidirectionally bonding UHMWPE (Ultra-High Molecular Weight Polyethylene) fibers over HDPE (High-Density Polyethylene) sheets making it easy to mold and cut to a specific shape.
- Is polyethylene the same as Kevlar? No, although both are a type of ballistic-rated polymer, they both have different properties. Kevlar acts like a net to catch and stop a bullet keeping it flexible, while Polyethylene acts more like an airbag. Kevlar is not able to stop rifle rounds where polyethylene is.
- Is polyethylene stronger than Kevlar? Usually, yes it is. The determining factor is always going to be the threat level. Most PE plates such as our P2 plate are rifle-rated to level III, while most Kevlar panels are IIIA. In a direct comparison of IIIA PE vs IIIA Kevlar, they will perform similarly, however, keep in mind Kevlar is flexible and able to conform to all body types while PE will be a hard plate.
Material: Polyethylene, with FragLock™ Coating
Protection: 7.62 mm FMJ, Full Metal Jacket bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s).
Capability: Multi-hit protection
Form: Curved
Dimensions & Compatibility:
-
9.5" x 12.5"
- Weight: 3.3 (+/- .3) lbs
- Thickness: 1"
- Plate Carriers: Testudo, Invictus & Valkyrie
Shelf life: 5 years
Manufactured: United States

A3 - Alloy Composite Body Armor
Regular price $399.00The innovative A3 body armor from Armored Republic is a tough, lightweight plate that combines polyethylene and alloy to produce a formidable level 3 plus-rated armor offering. This armor plate combines the best of both armor types; absorbing fragmentation while being able to stop mild steel core rounds such as 5.56x45MM, M193 Ball and M855- as well as 7.62x51MM NATO Ball.
The A3 plate comes in at 4.6 lbs, 0.7” thick, and is pending NIJ approval for 0101.06 certification (all tests passed). This plate is lighter than monolithic steel plates and the lightest plate in our Alloy Series. While this body armor's primary usage is for a plate carrier, it can also be inserted into a laptop pocket in one of our Phoenix or Firebird armored backpacks for added lightweight, rifle-rated protection.
One plate: more advantages than ever before.
A winner-take-all mentality applied to armor: The curved A3 - Alloy Composite Body Armor minimizes the compromises one must make when choosing armor by emphasizing the strengths of two different armor types: polyethylene and steel. Historically, these two materials have been separated and contrasted with an either-or mentality. The A3 removes that completely by using each in one plate.
The A3 armor plate's steel strike face provides a higher level of protection than a PE plate alone. It's able to stop the most common variants of 5.56x45MM such as mild steel penetrator M855 "Green Tip", M193 Ball and 7.62x51MM NATO M80 Ball. The polyethylene backer provides a lightweight backing that can absorb a round after the steel mitigates the impact. More Protection. Thinner. Lightweight. This FragLock™ coated armor plate can stop steel penetrator rounds like the M855, is 30% thinner than our PE armor at only 0.7", and weighs only 4.6 lbs.
All this comes in an ergonomic design to wrap around your chest and back. The patent-pending Alloy Composite Technology is an innovation you’ll find only at Armored Republic, and we’re proud to present it to you.
Frequently Asked Questions
- What will level 3 body armor stop? The National Institute of Justice (NIJ) rates level 3 body armor protection at 6x shots of 7.62x51mm @ 2,780 FPS from 51' away. Our AR500 Armor® Heritage plate and our UHMWPE (Ultra-High-Molecular-Weight Polyethylene) P2 plate are both rated to stop this threat.
- What is a level 3+ plate and what is it rated? Level 3+ indicates a protection rating that meets and exceeds the NIJ level III rating. Unfortunately, since level III+ is not a regulated threat level, this only means the plate can hold up to level III AND specific additional threats specified by the manufacturer NOT covered under the NIJ 0101.06 listing. Level 3 plus performance is going to vary from model and manufacturer. Most manufacturers use 3+ to denote the coverage of all 5.56 threats. For example, our A1, A2, and A3 plates are all III+ but have slightly different velocities at which they can handle 7.62x39, 5.56x45, and 7.62x51. The variable factors at which a III+ plate can perform are usually going to be defined by the materials used and the plate weight.
- Why is polyethylene (PE) used in body armor? Ultra-high-molecular-weight polyethylene or UHMWPE or PE for short is a lightweight super strong polymer that began its journey in life as lightweight sails for yachting competitions. The material (at the time referred to as Dyneema) was used because of how lightweight and rip-resistant it was. When UHMWPE is cut and pressed into varying thicknesses, it is capable of deforming and encapsulating ballistic projectiles. The pro of this armor is it is the lightest-weight rifle-rated protection on the market at only 3.3 lbs. The cons of this armor, if polyethylene is the only material used, are due to the unique nature of this armor's stopping capabilities, steel core ammunition such as the 5.56 M855 “Green tip” can potentially punch through, along with its steeper cost to manufacture.
Material: Alloy, polyethylene & polyurea cover
Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
Capability: Edge-to-edge multi-hit protection
Form: Curved
Dimensions & Compatibility:
-
10" x 12"
- Weight: 4.6 lbs
- Thickness: 0.7 inches
- Plate Carriers: Testudo, Valkyrie & Invictus
Shelf life: 5 years
Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))
-
Body Armor:
1 x A3 Armor Plate

A2 - Alloy Body Armor
Regular price $139.00The A2 body armor from Armored Republic is thin, low-profile, and low-weight- giving you maximum mobility without compromising stopping power. This curved armor plate has our durable FragLock™ coating and is especially mobile at just 5.5 pounds with a thickness of 0.26”. Made with a custom steel alloy blend, this level 3 plus protection defeats all pistols and most rifles, including 5.56 M193 and M855 at speeds of up to 3,000 FPS. Guarantee yourself flexibility on the mission with next-level protection.
-Whether you’re looking for something comfortable for long hours on duty, or something lightweight to be able to keep up with fast-paced action on the field, the lightweight A2 - Alloy Body Armor from Armored Republic has you covered.
Tested to go above and beyond NIJ level 3 standards, the curved, shooters cut A2 armor plate is level 3+ rated to defeat all pistols and most rifle ammunition, including 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS as well as AK-47 rounds (7.62x39) and .308 (7.62x51 M80 NATO Ball) at 2,850 FPS. Also, thanks to the custom steel alloy blend, it is able to protect against several hits without shattering or breaking like ceramic or polyethylene would. It also provides the same protection on the edges as it does in the center, giving you true edge-to-edge coverage.
The FragLock™ Coating, available in both Base Coat and Build-Up Coat versions, is a feature of Armored Republic plates that protects both the user and the plate itself. The Build-Up Coat protects the user by helping capture fragmentation (a bullet’s broken apart pieces after impact). The Base Coat seals the armor plate from sweat and other contaminants that would compromise the steel core. With either the Build-Up or Base Coat of FragLock™, this plate has a shelf-life of twenty years and requires no maintenance.
Frequently Asked Questions
- What is the lightest weight steel plate? Our Armored Republic A3 hybrid steel plate weighs only 4.6 lbs while our heavier Build-Up coated A1 Plate weighs in at 9.5 lbs. Lastly, our robust and mobile Build-Up coated A2 Plate weighs almost in between at only 6.5 lbs.
- How thick does steel need to be bullet-resistant? Thickness is relevant to materials used. Some materials like UHMWPE require much more to stop and encapsulate a projectile while steel and ceramic only have to be thick enough to provide a hardened surface that can withstand a ballistic threat. Since there are different types of steel that can be used for steel armor, most AR500-550 steel plates only need to be roughly 0.25” thick. When fragmentation coating is applied the thickness increases to roughly 0.5” thick.
- What is spall and fragmentation? We often see people use these two terms interchangeably, but they are not the same. Fragmentation is when a high-velocity projectile (such as a bullet) hits a surface hard enough to cause it to break into fragments. Fragments that are not fully decelerated continue to travel outward from the point of impact. When you are using steel core armor, you can expect to see fragmentation only if the armor stops a threat. Spalling is when armor breaks and leaves pieces that become a backward threat to the wearer. Generally speaking, ceramic-type armor spalls. Because ceramic armor is generally more brittle than other forms of armor, it is especially susceptible to spalling and fragmentation. Learn about our proprietary fragmentation mitigation coating: FragLock™.
Material: Ballistic steel alloy blend of 650 hardness on the Brinell scale, with FragLock™ Coating
Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30 FPS) and 7.62x39 (ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.
Capability: Edge-to-edge multi-hit protection
Form: Curved
Dimensions & Compatibility:
-
10" x 12"
- Base Coat (5.5 lbs, 0.25")
- Build-Up Coat (6.5 lbs, 0.50")
- Plate Carriers: Testudo, Valkyrie & Invictus
-
11" x 14"
- Base Coat (7 lbs, 0.25")
- Build-Up Coat (8.5 lbs, 0.50")
- Plate Carriers: Testudo
Shelf life: 20 years
Manufactured: United States
Striker Level IIIA Advanced Combat Helmet
Regular price $789.95Description
Level IIIA Ballistic Protection with the Striker Advanced Combat Helmet (ACH)
Made in the U.S.A. by U.S. Veterans
The Chase Tactical Striker Advanced Combat Helmet (ACH) is designed utilizing the most advanced ballistic protection against handgun ammunition. The shell is composed of multi-layered advanced composite; The harness assembly consists of a BOA suspension harness retention System. The reduced profile enables a wider peripheral and upward field of view, for better situational awareness and unrestricted movement, and also accommodates protective goggles, night vision goggles (NVG), and a communication system. WILCOX L4 WLS Three Hole Shroud now comes as a standard item!
Features:
- Protection Level: Level IIIA according to NIJ 0106.01 including Frag protection according to MILSTD 662F.
- NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ 0106.01
- Materials: Kevlar® fibers and thermoset resin shell construction.
- Helmet Pad: Comes standard with D3O 7 point helmet pads.
- Included Accessories: WILCOX L4 WLS Shroud, Chase Tactical Rails, Bungee Retention Strap, Velcro Strip, and BOA Suspension Retention System with Dial Knob harness system.
- Circumference: Measure around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Reason: Maximum Ballistic Protection.
- MADE IN THE USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow approx. 4-5 Weeks for shipment.
COMMUNICATIONS HEADSET IS NOT INCLUDED. SHOWN FOR DEMONSTRATION PURPOSES.
Additional information
Weight | 6 lbs |
---|---|
Style |
High Cut, Mid Cut Helmets, Standard Cut |
Color |
Black, Coyote, Desert Tan, Navy, OD Green (Olive Drab), Ranger Green |
Size |
Small, Medium, Large, X-Large |
Brand |
Striker |
Manufacturer |
Chase Tactical |
Size
SIZE | WEIGHT | |
SMALL | 21.1″ to 21.9″ | 2.60 LBS |
MEDIUM | 21.9″ to 22.7″ | 2.80 LBS |
LARGE | 22.7″ to 24.0″ | 3.00 LBS |
X-LARGE | 24.0″ to 26.0″ |
3.30 LBS |
Specification
SPECIFICATION | |
TESTING STANDARDS | NIJ 0101.06 |
PADDING | TEAM WENDY CAM FIT |
Ballistics
BALLISTICS
SPEER .44 MAG 240GR
SPEER .357 SIG 125GR
Striker-Ultra Lightweight Advanced Combat Helmet-High Cut
Regular price $819.95Description
Chase Tactical STRIKER Ultra Lightweight Level IIIA High Cut Ballistic Helmet
Made in the USA
The Chase Tactical STRIKER Ultra Light ACH Level IIIA High Cut Ballistic Helmet is designed utilizing the most advanced ballistic protection against handgun ammunition.
- Chase Tactical STRIKER HPACHHC: High Performance Advanced Combat Helmet Level IIIA High Cut
- Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to MilStd 662f
- NIJ Standard 0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 by an NIJ accredited laboratory
- Materials Including: UHMWPE Spectra® fibers and thermoset resin shell construction
- Head protection: Front, back, crown, and top of head
- Adjustable: Multiple Harness options and comes standard with BOA suspension harness system
- Padding: D3O TRUST 7 Pad helmet system
- Sizing: Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Reason: Maximum Ballistic Protection.
-
Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material
- MADE IN THE USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow approx. 4-5 Weeks for shipment.
Additional information
Weight | 5 lbs |
---|---|
Color |
Black, Coyote, OD Green (Olive Drab) |
Size |
Small, Large, Medium, XLarge |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size
Size | Length | Width | Circumference | Weight |
S | 7.1 to 7.6 | 5.6 to 6.0 | 21.1 to 21.9 | 1.7 lbs |
M | 7.6 to 7.9 | 6.6 to 6.3 | 21.9 to 22.7 | 1.8 lbs |
L | 7.9 to 8.3 | 6.3 to 6.5 | 22.7 to 24.0 | 2.0 lbs |
XL | 8.3 to 8.8 | 6.5 to 7.1 | 24.0 to 26.0 | 2.2 lbs |
Specification
Specification | |
TESTING STANDARDS | NIJ 0101.06 |
PADDING | D3O TRUST 7 Pad helmet system |
Ballistics
Cartridge | Projectile | Vel (ft/s ± 30) | Vel (ft/s ± 9) |
.357 SIG (NIJ06) |
125 gr FMJ |
1470 |
448 |
.44 Magnum (NIJ06) |
240 gr SJHP |
1430 |
436 |
.357 Magnum |
158 gr JSP |
1430 |
435 |
.44 Magnum |
240 gr SWCGC |
1400 |
426 |
9 x 19 mm Parabellum |
124 gr FMJ RN |
1400 |
426 |
40 S&W |
180 gr FMJ |
1155 |
352 |
V50 | 17 gr | 2221 | 677 |
The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO and internationally.
Striker-High Performance Advanced Combat Helmet-High Cut
Regular price $919.95Description
Chase Tactical STRIKER High Performance Level IIIA High Cut Ballistic Helmet
Made in the USA
The Chase Tactical STRIKER High Performance ACH Level IIIA High Cut Ballistic Helmet is designed utilizing the most advanced ballistic protection against handgun ammunition.
- Chase Tactical STRIKER HPACHHC: High Performance Advanced Combat Helmet Level IIIA High Cut
- Protection: Level IIIA Stand Alone Against Handgun Ammunition
- NIJ Standard 0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 by an NIJ accredited laboratory
- Materials Including: Hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
- Head protection: Front, back, crown, and top of head
- Adjustable: Multiple Harness options and comes standard with BOA suspension harness system
- Padding: D3O TRUST 7 Pad helmet system
- Sizing: Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Reason: Maximum Ballistic Protection.
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material
- MADE IN THE USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow approx. 4-5 Weeks for shipment.
Additional information
Weight | 5 lbs |
---|---|
Color |
Black, Coyote, Desert Tan, Foliage Green, Navy, OD Green (Olive Drab), Ranger Green |
Size |
Large, Medium, Small, XLarge |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size
Size | Length | Width | Circumference | Weight |
S | 7.1 to 7.6 | 5.6 to 6.0 | 21.1 to 21.9 | 2.5 lbs |
M | 7.6 to 7.9 | 6.6 to 6.3 | 21.9 to 22.7 | 2.7 lbs |
L | 7.9 to 8.3 | 6.3 to 6.5 | 22.7 to 24.0 | 2.8 lbs |
XL | 8.3 to 8.8 | 6.5 to 7.1 | 24.0 to 26.0 | 3 lbs |
Specification
Specification | |
TESTING STANDARDS | NIJ 0101.06 |
PADDING | D3O TRUST 7 Pad helmet system |
Ballistics
Cartridge | Projectile | Vel (ft/s ± 30) | Vel (ft/s ± 9) |
.357 SIG (NIJ06) |
125 gr FMJ |
1470 |
448 |
.44 Magnum (NIJ06) |
240 gr SJHP |
1430 |
436 |
.357 Magnum |
158 gr JSP |
1430 |
435 |
.44 Magnum |
240 gr SWCGC |
1400 |
426 |
9 x 19 mm Parabellum |
124 gr FMJ RN |
1400 |
426 |
40 S&W |
180 gr FMJ |
1155 |
352 |
V50 | 17 gr | 2579 | 786 |
The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO and internationally.
Striker-Advanced Combat Helmet-High Cut
Regular price $519.95Description
Lightweight ballistic protection with the Striker ACH Level IIIA High Cut Ballistic Helmet
Designed in the U.S.A. by U.S. Veterans
The Striker ACH Level IIIA Ballistic Helmet is an Advanced Combat Helmet (ACH) designed utilizing the most advanced ballistic protection against handgun ammunition and Frag protection according to MilStd 662f.
- The Chase Tactical Striker ACHHC: Advanced Combat Helmet Level IIIA High Cut
- Ballistic Helmet Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to MilStd 662f
- NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
- Materials Including: Kevlar® fibers and thermoset resin shell construction
- Head protection: Front, back, crown, and top of head
- Adjustable: Multiple Harness options and comes standard with 4 pt H
- Harness Padding: D3O TRUST 7 Pad helmet system
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow approx. 3 Weeks for shipment.
Additional information
Weight | 5 lbs |
---|---|
Color |
Black, Coyote, Desert Tan, Foliage Green, Navy, OD Green (Olive Drab), Ranger Green |
Size |
Large, Medium, Small, XLarge |
Brand |
Striker |
Manufacturer |
Chase Tactical |
Size
Size | Length | Width | Circumference | Weight |
S | 7.1 to 7.6 | 5.6 to 6.0 | 21.1 to 21.9 | 2.5 lbs |
M | 7.6 to 7.9 | 6.6 to 6.3 | 21.9 to 22.7 | 2.6 lbs |
L | 7.9 to 8.3 | 6.3 to 6.5 | 22.7 to 24.0 | 2.7 lbs |
XL | 8.3 to 8.8 | 6.5 to 7.1 | 24.0 to 26.0 | 2.9 lbs |
Specification
SPECIFICATION | |
TESTING STANDARDS | NIJ 0101.06 |
PADDING | INTERIOR 7 POINT ACH PAD |
Ballistics
Cartridge | Projectile | Vel (ft/s ± 30) | Vel (ft/s ± 9) |
.357 SIG (NIJ06) |
125 gr FMJ |
1470 |
448 |
.44 Magnum (NIJ06) |
240 gr SJHP |
1430 |
436 |
.357 Magnum |
158 gr JSP |
1430 |
435 |
.44 Magnum |
240 gr SWCGC |
1400 |
426 |
9 x 19 mm Parabellum |
124 gr FMJ RN |
1400 |
426 |
40 S&W |
180 gr FMJ |
1155 |
352 |
V50 | 17 gr | 2221 | 677 |
The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO and internationally.
Striker-Advanced Combat Helmet-Mid Cut
Regular price $519.95Description
Ultimate Ballistic Protection with the Striker ACH Level IIIA Combat Helmet
Mid Cut Ballistic Helmet by Chase Tactical
The Chase Tactical Striker ACH (Advanced Combat Helmet) Level IIIA Mid Cut Ballistic Helmet is designed utilizing the most advanced ballistic protection against handgun ammunition.
- Chase Tactical Striker ACHMC: Advanced Combat Helmet Level IIIA Mid Cut
- Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to MilStd 662f
- NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
- Materials Including: Kevlar® fibers and thermoset resin shell construction
- Head protection: Front, back, crown, and top of head
- Adjustable: Multiple Harness options and comes standard with 4 pt H
- Harness Padding: D3O TRUST 7 Pad helmet system
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
- Made in the USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow approx. 4-5 Weeks for shipment.
Additional information
Weight | 5 lbs |
---|---|
Color |
Black, Coyote, Desert Tan, Foliage Green, Navy, OD Green (Olive Drab), Ranger Green |
Size |
Large, Medium, Small, XLarge |
Brand |
Striker |
Manufacturer |
Chase Tactical |
Size
Size | Length | Width | Circumference | Weight |
S | 7.1 to 7.6 | 5.6 to 6.0 | 21.1 to 21.9 | 2.6 lbs |
M | 7.6 to 7.9 | 6.6 to 6.3 | 21.9 to 22.7 | 2.7 lbs |
L | 7.9 to 8.3 | 6.3 to 6.5 | 22.7 to 24.0 | 2.8 lbs |
XL | 8.3 to 8.8 | 6.5 to 7.1 | 24.0 to 26.0 | 3.0 lbs |
Specification
SPECIFICATION | |
TESTING STANDARDS | NIJ 0101.06 |
PADDING | INTERIOR 7 POINT ACH PAD |
Ballistics
Cartridge | Projectile | Vel (ft/s ± 30) | Vel (ft/s ± 9) |
.357 SIG (NIJ06) |
125 gr FMJ |
1470 |
448 |
.44 Magnum (NIJ06) |
240 gr SJHP |
1430 |
436 |
.357 Magnum |
158 gr JSP |
1430 |
435 |
.44 Magnum |
240 gr SWCGC |
1400 |
426 |
9 x 19 mm Parabellum |
124 gr FMJ RN |
1400 |
426 |
40 S&W |
180 gr FMJ |
1155 |
352 |
V50 | 17gr | 2221 | 677 |
The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO and internationally.
34i1 RIFLE ARMOR, LEVEL III/IV
Regular price $259.95Description
Ultimate protection with the Next Generation 34i1 Level III/IV ICW Armor Plates
The 34i1 Level 3 Armor Plates Series is our next generation of NIJ 0101.06 independently tested products and is designed to defeat Level III threats from high velocity rifle rounds when used in–conjunction with a Level IIIA soft armor.
The CT 34i1 are an extremely lightweight law enforcement and special operations, hard level 3 armor plates with proprietary advanced ballistic matrix material components.
34i1 Level III/IV ICW Armor Plates Features
- Protection: Level III/IV ICW Level IIIA Soft Armor (High Velocity Rifle Rounds and Armor Piercing Threats)
- NIJ Standard 0101.06: This product has been independently tested by an NIJ approved laboratory according to the NIJ standard of protection
- RST: Rifle Special Threats Validated
- Material: Ceramic strike face composite backing
- Exterior Cover: 1000D Cordura®, Textured Nylon
- Thinness: .85”
- Multi-curve Shape: is sold as independently tested according to NIJ 0101.06 standard
- Cut: The 10” x 12” shooters cut and multi-curve shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5”
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship.
- Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels

Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow 4-5 Weeks for shipment.
Additional information
Weight | 8 lbs |
---|---|
Plate Size & Cut |
10.00"X13.25" SAPI/ESAPI, 10"X12" Full Size, 10"X12" Multi Curve Shooters Cut, 10"X12" Shooters Cut, 10"X12" Swimmers Cut, 11.00"X14.00" SAPI/ESAPI, 5"X7" Full Size, 5"X8" Full Size, 6"X6" Full Size, 6"X8" Full Size, 7.50"X11.50" SAPI/ESAPI, 8.75"X11.75" SAPI/ESAPI, 8"X10" Full Size, 8"X10" Shooters Cut, 9.50X"12.50" SAPI/ESAPI |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size Chart
Size | Curvature | Cut | Weight (lbs/ kg) |
5 x 7 | Single Curve | Full | 2.3 / 1.1 |
5 x 8 | Single Curve | Full | 2.7 / 1.2 |
6 x 6 | Single Curve | Full | 2.2 / 1.0 |
6 x 8 | Single Curve | Full | 3.1 / 1.4 |
8 x 10 | Single Curve | Full | 5.2 / 2.3 |
8 x 10 | Single Curve | Shooters | 5.0 / 2.3 |
10 x 12 | Single Curve | Full | 7.7 / 3.5 |
10 x 12 | Single Curve | Shooters | 6.5 / 3.0 |
10 x 12 | Single Curve | Swimmers | 6.9 / 3.3 |
10 x 12 | Multi Curve | Shooters | 6.5 / 3.0 |
7.5 x 11.5 | Multi Curve | SAPI (XS) | 5.0 / 2.2 |
8.75 x 11.75 | Multi Curve | SAPI (S) | 6.4 / 2.9 |
9.5 x 12.5 | Multi Curve | SAPI (M) | 7.4 / 3.3 |
10 x 13.25 | Multi Curve | SAPI (L) | 8.4 / 3.8 |
11 x 14 | Multi Curve | SAPI (XL) | 9.3 / 4.2 |
Ballistics
Weapon Type | Ammunition | Vel (ft/s ± 30) | Vel (m/s ± 9) |
Rifle M-1 (NIJ06) | 7.62 x 63 mm – AP M2 | 2880 | 878 |
Rifle AK-47, M, SKS | 7.62 x 39 mm – API | 2380 | 725 |
Rifle M-16/AR-15 | 5.56 x45mm – M855/SS109 | 3117 | 950 |
Rifle M-16/AR-15 | 5.56 x45mm – M193 | 3150 | 960 |
Rifle SVD, Dragunov | 7.62 x 54R-LPS | 2840 | 865 |
Rifle SVD, Dragunov | 7.62 x 54R-L | 2840 | 865 |
Rifle M-1 | 7.62 x 63 mm – JSP | 2780 | 847 |
Rifle SVD, Dragunov | 7.62 x 54R -B-32 API | 2800 | 854 |
Rifle FN FAL | 7.62 x 51 mm – M80 | 2780 | 847 |
Rifle AK-47, M, SKS | 7.62 x 39 mm –Mild Steel Core | 2380 | 725 |
Rifle AK-47, M, SKS | 7.62 x 39 mm – Ball | 2380 | 725 |
Some Products We Sell Carry RESTRICTIONS In Certain States and Some Products ARE NOT EXPORTABLE Under U.S. ITAR Laws. The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO just make sure when you’re ordering an item you know that it’s exportable and follow U.S. Export ITAR Laws.
We also ship internationally.
4S16 RIFLE ARMOR, LEVEL IV - SINGLE & MULTI CURVE
Regular price $399.95Description
4S16 Level IV Stand Alone Rifle Plate
The Chase Tactical 4S16 Series are NIJ 06 Compliant Stand Alone Armor Piercing Plates. The 4S16 is also DEA Compliant Providing protection from Armor Piercing munitions. The 4S16 is an ideal choice for end users seeking a high performing ballistic resistant armor plate.
- Protection: Level IV Stand Alone Armor Piercing
- NIJ Standard 0101.06: This product has been independently tested by an NIJ approved laboratory according to the NIJ standard of protection
- RST: Rifle Special Threats Validated
- Material: Ceramic strike face composite backing
- Exterior Cover: 1000D Cordura®, Textured Nylon, Polyester Veil, Polyurea
- Thinness: 0.75”
- Cut: The 10” x 12” shooters cut and multi-curve shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5”
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship.
- Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels.
- MADE IN THE USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow 4-5 Weeks for shipment.
Additional information
Weight | 10 lbs |
---|---|
Plate Size & Cut |
10.00"X13.25" Multi Curve SAPI, 10"X12" Full Size, 10"X12" Multi Curve Shooters Cut, 10"X12" Shooters Cut, 10"X12" Swimmers Cut, 11.00"X14.00" Multi Curve SAPI, 5"X7" Full Size, 5"X8" Full Size, 6"X6" Full Size, 6"X8" Full Size, 7.5"X11.5" Multi Curve SAPI, 8.75"X11.75" Multi Curve SAPI, 8"X10" Full Size, 8"X10" Shooters Cut, 9.50"X12.50" Multi Curve SAPI |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size Chart
Size | Shape | Cut | Weight (lbs/kg) |
5 x 7 | Single Curve | Full Cut | 2.2 / 1.0 |
5 x 8 | Single Curve | Full Cut | 2.6 / 1.2 |
6 x 6 | Single Curve | Full Cut | 2.1 / 1.0 |
6 x 8 | Single Curve | Full Cut | 3.0 / 1.4 |
8 x 10 | Single Curve | Full Cut | 5.0 / 2.3 |
8 x 10 | Single Curve | Shooters Cut | 4.8 / 2.2 |
10 x 12 | Single Curve | Full Cut | 7.4 / 3.3 |
10 x 12 | Single Curve | Shooters Cut | 6.2 / 2.8 |
10 x 12 | Single Curve | Swimmers Cut | 6.6 / 3.0 |
10 x 12 | Multi Curve | Shooter Cut | 6.2 / 2.8 |
7.5 x 11.5 | Multi Curve | SAPI (XS) | 5.2 / 2.0 |
8.75 x 11.75 | Multi Curve | SAPI (S) | 6.5 / 2.9 |
9.5 x 12.5 | Multi Curve | SAPI (M) | 7.5 / 3.4 |
10 x 13.25 | Multi Curve | SAPI (L) | 8.6 / 3.9 |
11 x 14 | Multi Curve | SAPI (XL) | 9.9 / 4.5 |
Specifiction
SPECIFICATION | |
PRODUCT NAME | CT-4S16 |
PROTECTION | LEVEL IV (MULTI STRIKE) |
NIJ CPL | 4S16 |
CONFIGURATION | SINGLE CURVE & MULTI CURVE |
THICKNESS | 0.75″ |
TYPE OF MATERIALS | CERAMIC STRIKE FACE COMPOSITE BACKING |
PROTECTIVE COVER | CORDURA |
Weapon Types
Weapon |
Ammunition |
VEL (ft/s ± 30) |
VEL (m/s ± 9) |
Rifle M-1 (NIJ06) |
7.62 x 63 mm – AP M2 |
2880 |
878 |
Rifle AK-47, M, SKS |
7.62 x 39 mm – API |
2380 |
725 |
Rifle M-16/AR-15 |
5.56 x45mm – M855/SS109 |
3117 |
950 |
Rifle M-16/AR-15 |
5.56 x45mm – M193 |
3150 |
960 |
Rifle SVD, Dragunov |
7.62 x 54R-LPS |
2840 |
865 |
Rifle SVD, Dragunov |
7.62 x 54R-L |
2840 |
865 |
Rifle M-1 |
7.62 x 63 mm – JSP |
2780 |
847 |
Rifle SVD, Dragunov |
7.62 x 54R -B-32 API |
2800 |
854 |
Rifle FN FAL |
7.62 x 51 mm – M80 |
2780 |
847 |
Rifle AK-47, M, SKS |
7.62 x 39 mm –Mild Steel Core |
2380 |
725 |
Rifle AK-47, M, SKS |
7.62 x 39 mm – Ball |
2380 |
725 |
Some Products We Sell Carry RESTRICTIONS In Certain States and Some Products ARE NOT EXPORTABLE Under U.S. ITAR Laws. The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO just make sure when you’re ordering an item you know that it’s exportable and follow U.S. Export ITAR Laws.
We also ship internationally.
4SAS7 RIFLE ARMOR, LEVEL IV STAND ALONE - MULTI CURVE
Regular price $219.95Description
4SAS7 Level IV Rifle Plate NIJ 04/05 Certified & DEA Compliant – MULTI CURVE
The Chase Tactical 4SAS7 Series are NIJ 04/05 Certified Stand Alone Multi-Curve Plates. The 4SAS7 is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from Armor Piercing munitions, the 4SAS7 is an ideal choice for end users seeking an affordable high performing ballistic resistant armor plate.
- Protection: Level IV Stand Alone Armor Piercing
- NIJ Standard 0101.04 (2005IR): This product has been certified compliant by NIJ
-
RST: Rifle Special Threats Validated
- Material: Ceramic strike face composite backing
- Exterior Cover: 1000D Cordura®, Textured Nylon, Polyester Veil, Polyurea
- Thickness: 0.75”
- Cut: The 10” x 12” shooters cut and multi-curve shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5”
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship.
- Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels.
- MADE IN THE USA
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow 4-5 Weeks for shipment.
Additional information
Weight | 7.3 lbs |
---|---|
Configuration |
10.00"x12.00" Shooters Cut, 10.00"X13.25" SAPI L Cut, 11.00"X14.00" SAPI XL Cut, 7.50"X11.50" SAPI XS Cut, 8.75"X11.75" SAPI S Cut, 9.50"X12.50" SAPI M Cut |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size
10.00″X12.00″ | MULTI CURVE SHOOTER CUT | 7.20 LBS |
7.50″X11.50″ | SAPI CUT (XS) | 5.50 LBS |
8.75″X11.75″ | SAPI CUT (S) | 7.00 LBS |
9.50″X12.50″ | SAPI CUT (M) | 8.10 LBS |
10.00″X13.25″ | SAPI CUT (L) | 9.30 LBS |
11.00″X14.00″ | SAPI CUT (XL) | 10.20 LBS |
Specification
SPECIFICATION | |
PRODUCT NAME | CT-4SAS-7 |
PROTECTION | LEVEL IV (MULTI STRIKE) |
NIJ CPL | 4SAS-7 |
CONFIGURATION | MULTI CURVE |
THICKNESS | 0.75″ |
TYPE OF MATERIALS | COMPOSITE / CERAMIC |
PROTECTIVE COVER | CORDURA |
Ballistics
BALLISTICS | VELOCITY |
5.56X45MM (M193) | 3000 FPS |
5.56X45MM (M855) | 3000 FPS |
7.62X63MM (M2) (AP) | 2880 FPS |
7.62X51MM (M80) | 2750 FPS |
7.62X39MM (MSC) (M43) | 2400 FPS |
Some Products We Sell Carry RESTRICTIONS In Certain States and Some Products ARE NOT EXPORTABLE Under U.S. ITAR Laws. The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO just make sure when you’re ordering an item you know that it’s exportable and follow U.S. Export ITAR Laws.
We also ship internationally.
4SAS7 RIFLE ARMOR, LEVEL IV STAND ALONE - SINGLE CURVE
Regular price $139.95Description
The 4SAS7 Series are NIJ 04/05 Certified Stand Alone Single Curve Plates. The 4SAS7 is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from Armor Piercing munitions, the 4SAS7 is an ideal choice for end users seeking an affordable high performing ballistic resistant armor plate.
- Protection: Level IV Stand Alone Armor Piercing
- NIJ Standard 0101.04 (2005IR): This product has been certified compliant by NIJ
-
RST: Rifle Special Threats Validated
-
Material: Ceramic strike face composite backing
-
Exterior Cover: 1000D Cordura®, Textured Nylon, Polyester Veil, Polyurea
-
Thickness: 0.75”
-
Cut: The 10” x 12” shooters cut and multi-curve shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5”
- Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship.
- Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels.
Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. No shipments to CT. Please allow 4-5 Weeks for shipment.
Additional information
Weight | 7.3 lbs |
---|---|
Configuration |
10.00"x12.00" Full Size, 10.00"x12.00" Shooters Cut, 10.00"x12.00" Swimmers Cut, 5.00"x7.00" Side Plate, 5.00"x8.00" Side Plate, 6.00"x6.00" Side Plate, 6.00"x8.00" Side Plate, 8.00"x10.00" Full Size, 8.00"x10.00" Shooters Cut |
Brand |
Chase Tactical |
Manufacturer |
Chase Tactical |
Size Chart
5.00″X7.00″ | SINGLE CURVE FULL CUT SIDE PLATE | 2.60 LBS |
5.00″X8.00″ | SINGLE CURVE FULL CUT SIDE PLATE | 2.90 LBS |
6.00″X6.00″ | SINGLE CURVE FULL CUT SIDE PLATE | 2.40 LBS |
6.00″X8.00″ | SINGLE CURVE FULL CUT SIDE PLATE | 3.40 LBS |
Specification
SPECIFICATION | |
PRODUCT NAME | CT-4SAS-7 |
PROTECTION | LEVEL IV (MULTI STRIKE) |
NIJ CPL | 4SAS-7 |
CONFIGURATION | SINGLE CURVE |
THICKNESS | 0.75″ |
TYPE OF MATERIALS | COMPOSITE / CERAMIC |
PROTECTIVE COVER | CORDURA |
Weapon Types
Weapon | Ammunition | VEL (ft/s ± 30) | VEL (m/s ± 9) |
Rifle M-1 (NIJ06) | 7.62 x 63 mm – AP M2 | 2880 | 878 |
Rifle AK-47, M, SKS | 7.62 x 39 mm – API | 2380 | 725 |
Rifle M-16/AR-15 | 5.56 x45mm – M855/SS109 | 3117 | 950 |
Rifle M-16/AR-15 | 5.56 x45mm – M193 | 3150 | 960 |
Rifle SVD, Dragunov | 7.62 x 54R-LPS | 2840 | 865 |
Rifle SVD, Dragunov | 7.62 x 54R-L | 2840 | 865 |
Rifle M-1 | 7.62 x 63 mm – JSP | 2780 | 847 |
Rifle SVD, Dragunov | 7.62 x 54R -B-32 API | 2800 | 854 |
Rifle FN FAL | 7.62 x 51 mm – M80 | 2780 | 847 |
Rifle AK-47, M, SKS | 7.62 x 39 mm – Mild Steel Core | 2380 | 725 |
Rifle AK-47, M, SKS | 7.62 x 39 mm – Ball | 2380 | 725 |
Some Products We Sell Carry RESTRICTIONS In Certain States and Some Products ARE NOT EXPORTABLE Under U.S. ITAR Laws. The BUYER Is Responsible For Knowing & Complying With All Local, State, Federal & U.S. Export ITAR Laws. We also ship APO/FPO just make sure when you’re ordering an item you know that it’s exportable and follow U.S. Export ITAR Laws.
We also ship internationally.