Backpacks

DESCRIPTION

The Apparition Short Barreled Rifle Bag (SBR) does not SCREAM, there is a dude with a rifle in a backpack that is trying not to look like a dude with a rifle in his backpack!!! This pack can easily exist among all the other travel backpacks that are filled with flannel, yoga pants beef jerky, and granola. The only difference is that instead of trail mix, this bag has the ability to carry copious amounts of copper bad guy candy and a 10.5-inch or shorter Bad Guy Candy dispenser (SBR).

The exterior of the Apparition is clean and has a two-tone fabric accent. On the sides of the bag are 2 water bottle-sized pockets and above them near the top are cinch straps that allow you to secure a photo tripod or walking sticks and like items. Beside each pocket is a zipper that opens to a small compartment to store a cell phone or like items.

On the bottom of the bag, there is a stowable rain fly so that your bag and contents are not soaked in a downpour. It also changes the color of the bag instantly.
We have brought the coffin design into the front pocket of this pack. It is pleated and has a vertical zipper on the right side of the pocket. The pocket is sized to carry items that you would need readily available, Ipad Mini, passports, and the like.

The next pocket is generous and has full length zippers with double pulls. The pocket is lined with a loop to allow customization with various hook-backed pouches or holsters. It can also carry an additional upper for the gun if you need to switch it up while out and about. Inside the front of the pocket, you will find the badass GGG logo and a zippered pocket sized to carry small loose items.

In the main compartment is where the action is! On the side that’s away from your back, there are two pockets with bungee keepers sized for 5.56mm rifle Mags. Above it is an additional zippered pocked to house NVGs and like sized items. On the back panel of the main compartment, there are three hook-backed adjustable keepers that allow you to lash the weapon down in the bag or secure your 16-inch gun broken down into two pieces. There are two additional flat straps to secure items to the pack, adding to the versatility of this design.

There is an extender on the bottom of the main compartment to allow you to put a weapon with a longer barrel or suppressor-equipped SBR into the bag with minimal signature emitted from the bag.
The waist belt and pack straps are padded and have air mesh on the surfaces that touch the body. The pack straps have load lifters and are adjustable for the majority of torso lengths. The waist belt has storage pockets on them as well. Perfect for a snack bar, spare mag, or flex cuffs.

Overall Capacity:
Approximately 1200 Cubic inches.

Main Pocket:
Height without extended bottom 27"
Height with extended bottom 33"
Width: 12"
Depth: 4"

Front Pocket:
Height: 14"
Width: 5"
Depth: 2"

Total Weight:
64 oz

DESCRIPTION

Our Gypsy bag is a 180 degree departure from what you have come to expect from Grey Ghost Gear. No, this bag is for the traveler and daily commuter who needs a sturdy bag with proper hoplogical features that does not advertise you’re an armed civilian.

The flap top design is more in keeping with the bicycle commuter crowd than the Low Pro traveler, but of course, looks can be deceiving. We have used waxed canvas for the majority of the bag and mixed stretch mesh on interior pockets and Hypalon accents on the yoke and front. The top flap of the bag includes a zippered pocket on either side, each lined with soft material to protect Eye Pro, your phone, or even your jewelry. On the lower left side of the flap, there appears the leather GG skull accent you know you love and adore. The flap is held down by two adjustable 1-inch side release buckles.

Below the flap is a pocket that has a top cover secured with hook and loop material and two water resistant zippers that allow the pocket to be opened like a gate. On the front are two zippered mesh pockets properly sized to carry various small items sized between a bottle of pain reliever, a phone charger, or brass knuckles. Further inside are stretch mesh pockets that vary in size to accommodate pens, flashlights, pistol mags, or that extra battery for your laptop.

The front of the pouch has a Hypalon patch with slots cut into it so you add a light or an extra pouch. Under the flap are two rows of PALS webbing with 7 channels to allow you to expand the capacity of the pack by adding pouches to it. There is a zippered pouch just above the PALS webbing, 12 inches long and 8 inches deep. This will carry a notebook, a blowout kit, and night vision goggles. Very roomy.

The main compartment is BIG. You can access this area (or let her out) by a zipper vertically along each side of the back panel to allow access with the flap closed. There is a large loop panel sewn to the inside of the back panel to affix holsters and various hook-backed pouches above that panel is another zippered pouch that is made of a stretch mesh. Size 12 X 7 inches. This pocket is big and will carry a small Macbook Air.

The back panel is padded with an air mesh that is quilted to improve wearer comfort and promote air circulation against the back. Sweaty backs are no good. Pack straps are in a yoke configuration and are adjustable for a wide range of wearer body types. They feature a built-in carry handle with a Hypalon piece that gives it a non-slip surface. The underside has air mesh to pad the straps and make them comfortable in hot climates.

Main Pocket:
Height: 19"
Width: 13" at bottom, 15.5" at top
Depth: 7"
Volume: 17 liters (1,093 cubic inches)

Front Pocket:
Height: 8"
Width: 12"
Depth: 2"

Total Weight:
44 oz

The Armored Republic Firebird Armored Backpack is the bigger brother to our Phoenix and has similar ballistic capabilities to our smaller pack. This bullet-resistant backpack comes with sewn-in soft or hard armor which gives you the ability to address both handgun and rifle-rated threats accordingly. Decrease your backpack weight, yet still get rifle-rated protection, by getting the Hybrid sewn-in backpack armor paired with our P2 or A3 body armor - both of which can easily be inserted into the laptop pocket of the backpack.

Like the Phoenix, the bullet-resistant Armored Republic Firebird Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. Nobody will know your backpack doubles as a lifesaving tool. The Firebird is a low-profile armor system designed to stop the ammunition used in the majority of shootings but provides more armor coverage than the standard Phoenix Armored Backpack.

The Firebird weighs less than 3 pounds in its lightest configuration and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use.

The Firebird features plenty of storage for your laptop and other personal gear. 

• The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. Perfect for all-around general use.
• Hypalon® reinforced bottom and accented front upper pocket (is designed for compatibility with the largest smartphones on the market, including their cases)
• The large front lower pocket is complete with a key lanyard with hook, and retention pockets for pens and other accessories. It will easily accommodate a full-sized pistol for concealment. 
• The lined top pocket is located right next to the backpack drag handle. This pocket is lined on the inside with a non-scratch soft fabric and is ideal for storing your sunglasses, wallet, keys, or other accessories.

Enhance your protection for less weight

If you're looking to get rifle-rated protection but for less weight, then our P2 and A3 body armor are add-ons worth considering. Simply insert one plate into the laptop pocket for added protection.

• P2 Body Armor: is 3.3 pounds and 1 inch thick. This polyethylene armor provides level 3 armor protection against 7.62x51 M80 Ball at 2780 FPS - as well as some special threats such as 5.56x45 M193 at 3150 FPS and 7.62x39 AK-47 at 2380 FPS. Due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.
• A3 Body Armor: is 4.6 pounds and 0.7 inches thick. This armor combines polyethylene and alloy to provide level 3 plus-rated armor that can stop mild steel core rounds such as 5.56x45MM, M193 Ball and M855 - as well as 7.62x51MM NATO Ball.

FIREBIRD BACKPACK

• Backpack Material
  • Black: 1000D Cordura Nylon
  • Multicam & Mars: 500D Nylon
• Armor Type
  • Hybrid: Dupont Kevlar, Honeywell Spectra Shield, and Honeywell Gold Shield Ballistic Fabric
  • III+ Lightweight Steel: Ballistic alloy with FragLock™ Coating
• Armor Protection
  • Hybrid: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g
  • Steel: Rated to defeat calibers up to 5.56x45 M193 at 3000 FPS (+/- 30 FPS), 5.56x45 M855/SS109 at 3115 FPS (+/- 30 FPS), 7.62x39 PS Ball at 2380 FPS (+/- 30 FPS), and 7.62x51 M80 NATO Ball at 2780 FPS (+/- 30 FPS)
• Weight
  • Hybrid: Backpack + Armor = Less than 3 lbs
  • Steel: Backpack + Armor = 11.1 lbs
• Shelf Life
  • Hybrid: 5 years
  • Steel: 20 years
• Compartments & Pockets:
  • Primary Compartment: 18” x 15” x 5" (with laptop sleeve)
  • Front Upper Pocket: 4.5” x 8”
  • Front Lower Pocket: 6” x 10” 
  • Top Pocket: 8” x 8”
• Features: Durable zippers with Hypalon pull tabs & water-resistant

Upgrades

P2 BODY ARMOR

• Material: Polyethylene, with FragLock™ Coating
• Protection: 7.62 mm FMJ, Full Metal Jacket bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s).
• Capability: Multi-hit protection 
• Form: Curved
• Dimensions & Compatibility:
  • 9.5" x 12.5"
    
    • Weight: 3.3 (+/- .3) lbs
    • Thickness: 1"
• Shelf life: 5 years
• Manufactured: United States

A3 BODY ARMOR

• Material: Alloy, polyethylene & polyurea cover
• Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
• Capability: Edge-to-edge multi-hit protection
• Form: Curved
• Dimensions & Compatibility:
  • 10" x 12"
    • Weight: 4.6 lbs
    • Thickness: 0.7 inches
• Shelf life: 5 years
• Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))

The Armored Republic Phoenix armored backpack is a functional pack you can take practically anywhere. This bullet-resistant backpack has sewn-in soft armor that will stop 95% of the rounds used in shooting incidents. To enhance your protection, get our lightweight, rifle-rated P2 or A3 body armor, which can easily be inserted into the laptop pocket. 

Looking for a functional item you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents? Look no further than the Phoenix armored backpack from Armored Republic.

Discreet protection, always available

The bullet-resistant Phoenix Backpack has Level IIIA-rated protection, which covers .44 Magnum @ 1,440 FPS and all lesser threats. Nobody will know your backpack doubles as a lifesaving tool. The Phoenix is a low-profile armor system designed to stop the ammunition used in the majority of shootings. 

The Phoenix weighs less than 3 pounds and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use.

The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. This laptop sleeve also doubles as an up-armored pocket where an additional plate of armor can be added to provide enhanced protection. Our P2 or A3 is an excellent lightweight rifle-rated option for this task. The front pocket is large and includes a key lanyard with hook and retention pockets for pens and other accessories. The flat front-facing pocket is low profile and can accommodate a full-sized pistol for concealment.

Enhance your protection

• P2 Body Armor: is 3.3 pounds and 1 inch thick. This polyethylene armor provides level 3 armor protection against 7.62x51 M80 Ball at 2780 FPS - as well as some special threats such as 5.56x45 M193 at 3150 FPS and 7.62x39 AK-47 at 2380 FPS. Due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.
• A3 Body Armor: is 4.6 pounds and 0.7 inches thick. This armor combines polyethylene and alloy to provide level 3 plus-rated armor that can stop mild steel core rounds such as 5.56x45MM, M193 Ball and M855 - as well as 7.62x51MM NATO Ball.

PHOENIX ARMORED BACKPACK

• Material
  • Backpack: 1680D Cordura Hypalon
• Hybrid Armor: Dupont Kevlar, Honeywell Spectra Shield, and Honeywell Gold Shield Ballistic Fabric
• Armor Protection:
  • Hybrid: .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g
• Weight
  • Backpack: 1.72 lbs (not including armor)
• Features: stops bullets used in 95% of gun-related homicides, padded rear backing for comfort, padded fully adjustable backpack straps & high traction Hypalon bottom is abrasion and water-resistant
• Compartments & Pockets:
  • Large Main Pocket size: 18”x13”x9" (with laptop sleeve)
  • Medium Front pocket size: 10”x10”
  • Small pocket Size: 6”x10”
• Shelf Life: 5 years

Upgrades

P2 BODY ARMOR

• Material: Polyethylene, with FragLock™ Coating
• Protection: 7.62 mm FMJ, Full Metal Jacket bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s).
• Capability: Multi-hit protection 
• Form: Curved
• Dimensions & Compatibility:
  • 9.5" x 12.5"
    
    • Weight: 3.3 (+/- .3) lbs
    • Thickness: 1"
• Shelf life: 5 years
• Manufactured: United States

A3 BODY ARMOR

• Material: Alloy, polyethylene & polyurea cover
• Protection: 7.62x51mm NATO M80 Ball, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s). Special threat protection against M193, M855 and 7.62x39mm PS Ball
• Capability: Edge-to-edge multi-hit protection
• Form: Curved
• Dimensions & Compatibility:
  • 10" x 12"
    • Weight: 4.6 lbs
    • Thickness: 0.7 inches
• Shelf life: 5 years
• Manufactured: United States (pending NIJ approval for 0101.06 certification (all tests passed))